Browse all practice questions for the MK-20 / KM-37 Portable Surface Supplied Diving Systems Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

MK-20 / KM-37 Portable Surface Supplied Diving Systems Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the minimum overbottom pressure required from 61-130 FSW when diving the KM37?
  • What is the maximum dive depth capability of the FADS3?
  • In FADS3, what is the main purpose of the isolation valves on the top ports of each flask?
  • What is the purpose of the diver's buoyancy compensator?
  • What physiological effects should divers be aware of when underwater?
  • Which part of the MK-20 system is responsible for balancing the diver's internal pressure during ascent and descent?
  • What is the positive pressure capability of the MK 20 Mod 0 provided to the Full Face Mask (FFM)?
  • What feature distinguishes the MK 20 Mod 0 as suitable for category 3 contaminated water?
  • What is the primary responsibility of a dive tender?
  • What should the overbottom pressure be set to when diving with the MK20 scuba?
  • What should be included in a post-dive debriefing?
  • What regular maintenance check should operators perform on the regulator?
  • What is the primary role of the dive supervisor during a diving operation?
  • What action is advised if a diver feels cold during the dive?
  • What is the role of a dive medical technician?
  • What is the primary advantage of using a portable surface-supplied diving system like the MK-20?
  • What is the purpose of the umbilical hose in the MK-20 system?
  • What is used for dry suit inflation on the KM37?
  • What is the significance of testing comm cables for continuity?
  • What does the positive pressure from the MK 20 Mod 0 help to do?
  • What is the design pressure that the pressure rupture disk blows out at in the air supply rack assembly?
  • What is a critical part of dive planning?
  • What is a common cause of dizziness while diving?
  • Why is regular training important for surface supplied divers?
  • How should the diver respond to experiencing a rapid pressure change?
  • What is the maximum overbottom pressure required from 0-60 FSW when diving the KM37?
  • How should the umbilical be configured for optimal safety?
  • What is a critical safety procedure before commencing a dive with the MK-20 System?
  • What is an important feature of the preamplified communication assembly?
  • What should be verified when using a multi-meter to test an umbilical?
  • In what situation would you use the auto positive pressure test?
  • Which of these is a critical component of a diving helmet?
  • In the MK-20 system, what does the term 'umbilical' refer to?
  • What does FADS3 stand for in diving terminology?
  • What are the primary components of the MK-20 system?
  • For what purpose is the harness D-ring located at the back of the MK20 used?
  • What safety feature is included in the MK-20 system to manage underwater pressure changes?
  • What is the depth limit for the UBA MK 20 Mod 0 and 1 in surface supplied diving?
  • What action should be taken if a diver loses communication with the surface?
  • What happens to the thermal fuse at elevated ambient temperatures?
  • How often should divers practice emergency drills?
  • What is required before a dive can commence according to standard operating procedures?
  • In what current must extra weight be added when diving with an MK20 in open water?
  • At what PSI does each flask in the stackable compressed air rack assembly operate?
  • What is considered the safe maximum working pressure for the KM-37 helmet?
  • What is the typical operating pressure range for the air supplied in a surface-supplied diving system like the MK-20?
  • What is the maximum airflow capacity to check in the mini test kit for the MK20?
  • What must be verified before proceeding to the operational dive site?
  • What is the maximum depth supported by the stackable compressed air rack assembly for two divers and one standby?
  • What should divers do as part of their post-dive procedures?
  • What is the minimum overbottom pressure required from 0-60 FSW when diving the KM37?
  • What is the inside diameter of the strength member used in portable surface supplied diving systems?
  • How should a diver react to rapidly changing environmental conditions during a dive?
  • Describe the function of the diver's helmet in the KM-37 system.
  • How can divers manage their air supply effectively?
  • Dial-a-breath is capable of controlling up to what PSIG over bottom?
  • Why is it important to check the oxygen supply before a dive?
  • What average ACFM must the air supply system deliver to the diver?
  • What should divers do if they experience signs of decompression sickness?
  • Which MK20 rig is preferred for SCUBA mode?
  • How often is the MK-20 surface supply system required to be hydrostatically tested?
  • Which type of emergencies should divers be prepared to manage?
  • Which component supports a condensate drain valve on the air supply rack assembly?
  • Why is it important to inspect the diver's helmet prior to a dive?
  • Which of the following is a common training aspect for users of the MK-20 system?
  • Which type of umbilical is associated with having the layers wound together in a spiral?
  • How does water temperature affect a diver's performance?
  • What characterizes a non-preamplified communication assembly for the MK20?
  • Which of the following is NOT a purpose of the EGS?
  • How can underwater visibility be improved during a dive?
  • What is the significance of clear communication between the diver and dive supervisor?
  • What should a diver do if they feel disoriented underwater?
  • How many types of basic umbilical constructions exist in diving systems?
  • What is the maximum pressure that the installed relief valve on the volume tank assembly is designed to relieve?
  • What is the capacity of each flask in a stackable compressed air rack assembly regarding SCF of compressed air?
  • What is a characteristic of the strength member in the diving umbilical?
  • Why is it imperative that the head cushion fits properly?
  • Why is a good seal on the oral nasal assembly important?
  • How often must maintenance be performed during extended dive missions?
  • What is the maximum life expectancy of the rubber breathing gas hose in a diving system?
  • What is the function of the breathing gas supply in the MK-20 system?
  • In deep-sea diving, what does the term "decompression" refer to?
  • What material type is the strength member typically made from?
  • What is the maximum operating depth for the MK-20 Surface Supplied Diving System?
  • What is the main use of a dive watch?
  • What is the minimum strength that must be maintained by the strength member when the umbilical is tensioned?
  • What should the first stage regulator be adjusted to if the EGS is left topside?
  • Why might a diver need to adjust their equipment before diving?
  • At what PSIG are the overpressure relief valves set to operate on the FADS3 control console assembly?
  • How does the MK-20 system maintain a safe breathing environment for divers?
  • What is an essential practice for maintaining diving equipment?
  • What does the abbreviation "SCUBA" stand for?
  • What should a diver do in an out-of-air emergency?
  • What is the primary use of the mini test kit for the MK20?
  • What might indicate that the breathing gas supply in the MK-20 system is compromised?
  • For the MK20 diving system, what is the average sustained flow rate required from the air supply system?
  • What should divers regularly check in their MK-20 system before a dive?
  • What is the typical ascent rate recommended for divers?
  • What is the purpose of the nonreturn valve in the KM37 system?
  • Which of the following is NOT a color option for the MK20 mask?
  • What color is the communication line on the MK20 umbilical?
  • What is the maximum working limit for air in the KM37?
  • What does an umbilical system in diving typically provide?
  • What are the major assemblies of the KM37 portable surface supplied diving system?
  • What is a common indication that a diver should ascend?
  • In terms of safety, what is a significant characteristic of surface supplied diving systems?
  • What are the major assemblies of the MK20?
  • What is the rated working pressure for the MK20 hose?
  • When is the MK20 Mod 0 second-stage demand regulator required?
  • What is the main advantage of using a surface-supplied system in commercial diving?
  • Which model of the MK20 is preferred for diving in enclosed spaces or category 3 contaminated water?
  • In which scenarios should a diver abort a dive?
  • What critical safety aspect does the mini test kit assess besides check valve seal?
  • When is an Emergency Gas Supply (EGS) required with the MK20 system?
  • What is the minimum, desired, and maximum overbottom pressure required from 131-190 FSW when diving the KM37?
  • What material is the face port of the KM37 made of?
  • What is the purpose of a dive computer in surface supplied diving operations?
  • How can a diver communicate with the surface during a dive?
  • What type of operation does the FADS3 primarily support?
  • Which of the following is NOT a type of basic umbilical construction?
  • What is the maximum working limit for the MK20 surface supplied diving system?
  • What kind of problems can occur from rapid ascent during a dive?
  • At what temperature does the thermal fuse designed to relieve system pressure open?
  • What type of breathing pattern should divers maintain underwater?
  • Which component is essential for ensuring proper buoyancy control in the MK-20 system?
  • What aspect of a diver's health does the MK-20 aim to support while they are underwater?
  • In the context of diving, what is the role of a safety stop?
  • What are the four purposes of the steady flow valve?
  • What is the maximum depth limit for No-D dives?
  • What is the typical role of a diver in a surface supplied diving operation?
  • What components make up a preamplified communication assembly in the MK20?
  • When is the Emergency Gas Supply (EGS) mandatory for the KM37?
  • What are the main two functions of the head cushion in the KM37?
  • What is the primary function of communication systems in surface supplied diving?
  • Which type of gas is primarily used in the MK-20 diving system?
  • Why is a thorough pre-dive check important for the MK-20 system?
  • What is the primary function of a regulator in diving equipment?
  • Which assembly is NOT part of the MK20's major components?
  • Which component is NOT typically part of the umbilical?
  • How much SCF of compressed air can the Air Supply Rack Assembly of the FADS3 hold at 5,000 PSI?
  • What should divers do if they experience dizziness or lightheadedness underwater?
  • What is the maximum overbottom pressure required from 61-130 FSW when diving the KM37?
  • What is included in the composition of an umbilical?
  • What is one advantage of surface supplied diving systems over SCUBA systems?
  • Which method helps ensure a diver's safety during communication underwater?
  • How can divers effectively manage their air supply during a dive?
  • When diving with EGS SCUBA, the regulator should not be set lower than which pressure?
  • What is the working pressure in PSIG of the Volume Tank Assembly on the FADS3?
  • How many different configurations can the MK3 Mod 0 lightweight dive system be arranged into?
  • What material is the dry suit of the KM37 comprised of?
  • When is mission maintenance required prior to a diving mission?
  • What is the purpose of the condensate drain valve in the air supply rack assembly?
  • Which MK20 model is considered more suitable for surface supplied diving?
  • What is the minimum overbottom pressure for surface supplied MK20 diving?
  • How many divers and standby personnel can the stackable compressed rack assembly sufficiently support at a moderate heavy work rate?
  • What defines an adequate emergency gas supply (EGS) for divers?
  • Which diving condition could increase the risk of decompression sickness?
  • In the context of diving, what does "buddy system" refer to?
  • What is the maximum depth the MK20 Mod 1 can support in SCUBA mode?
  • What is the length of the hose assembly for the MK20 diving system?
  • What is the purpose of the umbilical in the MK-20 Surface Supplied Diving System?
  • What is the normal working limit for air on the KM37?
  • What is the primary purpose of using a surface marker buoy during a dive?
  • What is the total weight of the FADS3 Volume Tank Assembly?
  • What is the working pressure of the volume tank assembly on the lightweight dive system?
  • What is the normal working limit for HEO2 in the KM37?
  • What is a critical factor to confirm before starting a dive?
  • When testing communication cables, what should the resistance read approximately per 100 feet of length?
  • What essential equipment is required when using surface supplied diving systems?
  • What type of diving is the MK-20 system primarily designed for?
  • What is the desired maximum overbottom pressure for the MK20 surface supplied diving system?
  • What materials is the MK20 mask made from?
  • What is the main purpose of performing pre-dive checks on all equipment?
  • What does the term "equalization" refer to in diving?
  • What is the depth limit for the UBA MK 20 Mod 0 and 1 when used in SCUBA mode?
  • What is the desired overbottom pressure required from 0-60 FSW when diving the KM37?
  • What is one of the functions of the mini test kit in the MK20 system?
  • What is the setting for the installed relief valve on the volume tank assembly of the FADS3?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy